Home
   
 
MEX FLOW COPPER TUBES FOR PLUMBING AND HEATING SYSTEM
   
This product is supplied in 3 or 6 meter straight length in the half hard condition, an ideal temper for cold bending and forming max can be easily bent on an appropriate bending machine or for 6 to 22mm O.D. sizes, with a bending spring. its ease of manipulating and relatively light weight, combine with its ability to withstand high internal pressure makes Max the ideal product for Hot and Cold water, central heating and gas services installations. These is the general purpose copper tube for above ground services. Ideal for drinking water, central heating, senitation, hot and cold water, gas, various engineering.
Sizes
mm
6 8 10 12 15 22 28 35 42 54 66.7 76.1 108 133 159
Max Mean O.D mm 6.04 8.04 10.04 12.04 15.04 22.05 28.05 35.06 42.06 54.06 66.77 76.17 108.17 133.20 159.20
Min Mead O.D. mm 5.96 7.96 9.96 11.96 14.96 21.95 27.95 34.94 41.94 53.94 66.63 76.03 107.9 132.80 158.80
W.T. mm 0.6 0.6 0.6 0.6 0.7 0.9 0.9 1.2 1.2 1.2 1.2 1.5 1.5 1.5 2.0
Max W.P. (65C) Bar 133 97 77 63 58 51 40 42 35 27 20 24 17 14 15
 

lso As per BS EN 1057 - R220 (Previous Designation BS 2871 : Part 1: Table Y) supplied as either 6m long half or annealed 25m or 23 m long coils. With wall thickness approximately 1.5 times thicker than Max, it is the ideal product for underground application. The extra wall thickness also allows its use on certain pressurised stem installations with maximum working temperature of 205o C.

These copper tubes are recommended for use on underground services and are also suitable for: Drinking Water, Central Heating, Sanitation Gas and various engineering application

8 Good reasons to choose and use copper for plumbing and heating systems
* Tried and Tested
* Good value for money
* Versatile
* Recycleable
* Long Lasting
* Resist heat, corrosion, pressure and fire
* Healthy and safe
* Non-permeable

Back